 AgieCharmilles SINKER EDM
|
|
+GF+ Machining Solutions: AgieCharmilles EDM offers a wide array of Wire & Sinker EDM solutions to suit the needs of every level of manufacturer spanning from tool & die to precision part production. The innovative spirit of AgieCharmilles pioneered the first steps for EDM in the 1950s. Nowadays, AgieCharmilles continues to set the gold standard for the entire industry. |
|
⚡FORM eCAM - the first real CAM for Die-sinking EDM. Learn how it works here |
|
| At the heart of each AgieCharmilles sinker EDM solution is GF Machining Solutions’ proprietary, high-end Intelligent Speed Power Generator (ISPG). The electrical discharge machining (EDM) process is continuously optimized and that dramatically reduces electrode wear. Process control takes just a fraction of a second and produces an extremely uniform surface finish. |
AgieCharmilles FORM E 350/600
+ Affordable precision Sinker EDM
- General Purpose Tool & Die Sinker EDM
- C-Axis
- Shuttle tool changer
- EXCELLENT electrode wear ratio
- Positioning Accuracy: 50 nm
- Surface Finish: RA 0.1 µm
|
Travels: 13.78 x 9.843 x 9.843 in
Travels: 23.62 x 15.74 x 15.74 in |
AgieCharmilles FORM P 350/600/900
+ Boost your run time efficiency
- Deep rib machining
- Accura C-Axis
- Linear or rotary tool changer - Up to 160 tools
- Long term unattended machining - Automation ready
- EXCELLENT electrode wear ratio
- Positioning Accuracy: 50 nm
- Surface Finish: RA .08 µm
|
Travels: 13.78 x 9.84 x 11.81 in
Travels: 23.62 x 15.74 x 17.71 in
Travels: 35.43 x 27.55 x 19.68 in |
AgieCharmilles FORM S 350
+ Break through to the world of micro-profiles
Thanks to the AgieCharmilles FORM S 350 sinker EDM state-of the-art design with breakthrough generator technology, accuracy-enhancing stability, thermostabilization and productivity-boosting machining quality, customers in electronic component manufacturing easily meet their ICT and automotive customers’ stringent quality requirements.
- Micromachining
- 0% Graphite Electrode wear
- 3Ds mold surface texturing
- Accura C-Axis
- Surface finish: 0.08 µm
|
Travels: 13.78 x 9.84 x 11.81 in |
AgieCharmilles FORM X
+ Design for extreme accuracy and uncompromising quality
Forming your extreme success Extreme accuracy, highest precision in production, and unparalleled productivity come together as future-shaping solutions with the AgieCharmilles FORM X die-sinking EDM series. This series’ TECFORM ensures highest accuracy and reproducibility on both big and small parts. This is due to the fixed table and stiff machine base delivering perfect positioning accuracy along the entire axis travel. The result: high precision throughout the machining area.
Ramp up your efficiency and quality, thanks to this die sinker’s new discharge circuit allowing spark erosion power modulation and the flexibility to maximize material removal. Achieve greater finishing detail by reducing the gap to a few microns. You’ll achieve higher machining yields while preserving electrode geometry, due to an extremely low rate of electrode wear.
- Micromachining
- Unprecedented Levels of Part Quality
- 0% Graphite Electrode wear
- 3Ds mold surface texturing
- Accura C-Axis
- Surface finish: 0.08 µm
|
Travels: 15.74 x 11.81 x 13.78 in
Travels: 23.622 x 15.748 x 19.685 in |
AgieCharmilles DRILL E 300
Simply drill holes in multiple configurations
AgieCharmilles DRILL 20 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gaz turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from melting. With its five axis configuration the machine can drill holes at any angles on a inclined surface workpiece.
With numerical control axes X,Y and Z , AgieCharmilles DRILL 20 is widely used for drilling starting holes with the electrode range Ø 0.1 – 3.0 mm (0.004 – 0.12 in) and with electrode materials brass, copper and carbide, and workpiece materials steel and carbide.
- Wide range of technologies for material steel, hard metal, aluminum and copper etc.
- Fast programming and erosion for multi-holes with different diameters and technologies
- Fast set up cycles such as edge finding, center finding and corner finding with touch screen
|
DRILL E 300 Travels: 23.62 x 15.74 x 17.72 in |
AgieCharmilles Sinker EDM Machine Guidance
Peak Machine Sales helps shops compare AgieCharmilles sinker EDM machines for mold, die, cavity, rib, and precision detail work. Whether you are reviewing FORM series machines, used sinker EDM availability, or application fit, Peak can help match the machine to your part size, electrode strategy, finish requirements, and production needs.
Sinker EDM is often used when part geometry, material hardness, cavity depth, corner detail, or surface finish is difficult to achieve with conventional cutting.
What To Review Before Choosing A Sinker EDM
- Table capacity, tank size, and work envelope
- Generator capability and control condition
- Electrode handling and automation needs
- Finish, accuracy, and production requirements
- New or used sinker EDM availability
Need help choosing the right machine or consumable? Call Peak Machine Sales at (248) 380-0871.
Related: wire EDM machines | used EDM machines | EDM consumables | Products
