VC750 is a Vertical Machining Center of very compact and economic design with 

• space-saving design
• Most modern controls and drive systems
• high spindle speed
• for affordable entry-level price
• usually sold for small machining-operations for job-shops

It is also very popular for educational purpose in qualified technical schools.

VC850 is a Vertical Machining Center of high performance with 

• unique space-saving design of only 1,85x1,80 m
• patented guideway system which provides
• best access for operator to working area as very short distance to working table and
• best chip-flow with additional worm gear conveyors
• high spindle speed up to 18.000 rpm
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining or mold making with limited floor-space.

VC1150 is a Vertical Machining Center of high performance with

• unique space-saving design of only 2,65 x 2,27 m
• patented guideway system which provides
• best access for operator to working area as very short distance to working table and
• best chip-flow with additional worm gear conveyors
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining with heavy duty operations.

VC1150 is a Vertical Machining Center of high performance with

• unique space-saving design of only 2,65 x 2,27 m
• patented guideway system which provides
• best access for operator to working area as very short distance to working table and
• best chip-flow with additional worm gear conveyors
• high spindle speed up to 24.000 rpm
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining or mold making with limited floor-space.

VC1650 is a Vertical Machining Center of high performance with

• unique space-saving design of only 2,75 x 3,55 m
• patented guideway system which provides
• best access for operator to working area as very short distance to working table and
• best chip-flow with 4 additional worm gear conveyors in machine body
• high spindle speed up to 18.000 rpm
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining or mold making with limited floor-space.

U3-series is a Vertical Machining Center of high performance with

• two different X-strokes of 630 or 1530 mm
• Fixed table and moving column and therefore preferred for
• heavy workpieces
• machining of abrasive material like graphite which is dangerous for guideways
• high number of tools
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining or mold making.

U3-series is a Vertical Machining Center of high performance with

• two different X-strokes of 630 or 1530 mm
• Fixed table and moving column and therefore prefered for
• heavy workpieces
• machining of abrasive material like grafite which is dangerious for guideways
• high number of tools
• high spindle speed up to 20.000 rpm
• Most modern high-level controls and drives

usually sold for demanding customers in high level general machining or mold making.

U4-series is a Vertical Machining Center of unique design with

• Big integrated rotary axis inside machine body to wear
• supporting a T-nut both sided swing-table to hold clamping-tools
• with additional fixed table in left side of working area (U4-1530)
• two different X-strokes of 630 or 1530 mm
• moving column and therefore preferred for
• heavy workpieces
• machining of abrasive material like graphite which is dangerous for guideways
• Most modern high-level controls and drives

usually sold for very flexible purpose. On the both sides of the swing-table work holding plate it can be fixed various clamping tools to bring them flexible into operation or us it for angular operations and 3-face machining. Special clamping-towers for serial application and multi-side machining is possible too.

U4-series is a Vertical Machining Center of unique design with

• Big integrated rotary axis inside machine body to wear
• supporting a T-nut both sided swing-table to hold clamping-tools
• with additional fixed table in left side of working area (U4-1530)
• two different X-strokes of 630 or 1530 mm
• moving column and therefore preferred for
• heavy workpieces
• machining of abrasive material like graphite which is dangerous for guideways
• Most modern high-level controls and drives

usually sold for very flexible purpose. On the both sides of the swing-table work holding plate it can be fixed various clamping tools to bring them flexible into operation or us it for angular operations and 3-face machining. Special clamping-towers for serial application and multi-side machining is possible too.