Ultra rigid box way VMC for heavy cutting and long term accuracy Travels: 55.1" x 29.5" x 27.5"

CPV-1400B - 50 Taper

• Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.
• Box ways on all 3 axes greatly upgrades stability and dampening capability.
• Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
• Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Standard Features:

Balanced 6,000 RPM Spindle with spindle oil cooler 6000 BTU for High Speed Machining.

Hardened and Ground class C3 precision double-nut ballscrews (Ø40 mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.

Precision scraping on both bonded Turcite-B and cast iron surfaces helps to reduce wearing out, maintaining operation accuracy.

Hardened and ground slideways give an extra 40% wear resistance.

Capacity

X axis travel: 55.1"

Y axis travel: 29.5"

Z axis travel: 27.5"

Table Loading Area: 61" X 27.5"

Allowable Table Load: 3,968 lbs

Table T Slots - width x slot spacing: 0.7” x 5.0” x 3.9"

Spindle

Spindle nose to table top: 5.9" – 33.5"

Spindle nose diameter: 33.4"

Column to spindle center: 33.4"

Spindle taper: CAT 50 Big Plus

Spindle speed: 6,000 RPM

A.C. spindle motor (30 min.): 25 HP

Spindle torque (30 min): 384 ft-lbs

Spindle Driving Method: Geared Head Spindle

Automatic Tool Changer

ATC type: Twin Arm Type

Number of tools: 24

Tool Shank: CAT 50

Max tool dia.: 4.3”

Max tool diameter (No Adjacent Tool): 7.8”

Max tool length: 11.8”

Max tool weight: 33 lbs.

Tool Selection: Random Bi-Directional

Motion

X and Y axis rapid traverse rate: 590 IPM

Z axis rapid traverse rate: 472 IPM

Cutting feed rate: 393 IPM

Slide Type: Box Ways

Least command increment: .001mm

Positioning accuracy: +/- .00020" (full stroke)

Repeatability: +/- .00008"

General

Floor space required (W x D X H): 152" X 127.8" X 118"

Machine weight: 25,353 lbs.

Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

Power capacity: 83 Amps Minimum

Air Source Requirement: 85 – 115 PSI (3/8 ID Supply Hose)