Ultra rigid box way VMC for heavy cutting and long term accuracy Travels: 41.3" x 20.8" x 30.7"

CPV-1050B

The CPV Box Way Series of Vertical Machining Centers is designed for heavy cutting, long-term high accuracy, and superior surface finishes. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value. Constructed with high quality Meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy. ​

• Box ways on all 3 axes greatly upgrades stability and dampening capability.
• Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
• Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Standard Features:

Balanced 12,000 RPM Spindle with 6000 BTU spindle oil cooler for High Speed Machining.

Hardened and Ground C3 Double Nut Ballscrews (Ø40 mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.

All solid ways are coated with high grade Turcite-B. Hardened and ground slideways give an extra 40% wear resistance.

2 Solid Box Ways are on a one-piece base instead of two supporting ways connected to the main base, which provides more rigidity under heavy machining.

Main frame is made of Meehanite casting for superior rigidity

Capacity

X axis travel: 42"

Y axis travel: 20.9"

Z axis travel: 30.7"

Table Loading Area: 41.3” x 20.9”

Allowable Table Load: 2200 pounds

Table T Slots - width x slot spacing: .708” x 3.937” – (5)

Spindle

Spindle nose to table top: 3.9” – 34.6”

Spindle nose diameter: 2.8"

Column to spindle center: 23.2"

Spindle taper: CAT 40 Big Plus

Spindle speed: 12,000 RPM

A.C. spindle motor (30 min.): 20 HP

Spindle torque (30 min): 132 ft-lbs.

Spindle Driving Method: Belt Drive

Automatic Tool Changer

ATC type: Twin Arm Type

Number of tools: 24

Tool Shank: CAT 40

Max tool dia.: 3.1”

Max tool diameter (No Adjacent Tool): 5.9”

Max tool length: 9.8"

Max tool weight: 15.4 lbs.

Tool Selection: Random Bi-Directional

Motion

X and Y axis rapid traverse rate: 1,181 IPM

Z axis rapid traverse rate: 1,181 IPM

Cutting feed rate: 393 IPM

Slide Type: Box Ways

Least command increment: 001mm

Positioning accuracy: +/- .00020" (full stroke)

Repeatability: +/- .00008"

General

Floor space required (W x D X H): 125" x 96" X 120”

Machine weight: 13,700 lbs.

Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

Power capacity: 53 Amps Minimum

Air Source Requirement: 85 – 115 PSI