CNC Lathe w/ Y-axis - 8 in. chuck

NT-208Y

Y-Axis Lathe

30 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Working Area

Swing over bed: 26.74”

Swing over cross slides:16.35”

Maximum turning diameter: 15.74”

Maximum turning length: 20.47”

Travel

X Axis Travel: 8.66”

Y Axis Travel: 3.93”

Z Axis Travel: 24.8”

Rapid Traverse: 787 / 393 / 945 IPM

Spindle

Spindle Motor: 15 / 20 HP

Maximum Speed: 4,200 RPM

Hydraulic Chuck: 10”

Spindle Nose: A2-6

Hole Through Draw Tube: 2.05”

Turret

Tooling style: BMT-55

Turret Type: 12 – Servo driven

One Axial and one Radial BMT live holder included

Tailstock

Quill Diameter: 3.15”

Tailstock Travel: 1.81”

Quill Travel: 4.72”

Quill Taper: MT - #4

General

Floor Space Required (W X D): 151.14” X 76.77”

Height: 70.28”

Machine Weight: 9,150 LBS

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 57 Amps

Control Specifications – Fanuc OiM-F Conversational Control

8.4” color LCD screen Color graphics

Simultaneous Controlled Axis

Least input Increment on X and Z is .001 mm Least command increment on X and Z is .001mm Inch/Metric Conversion (G20/G21)

Interlock on All Axes Machine Lock on All Axes Emergency Stop

Stored Stroke Check 1, 2, 3, Mirror Image

Backlash Compensation

Unexpected disturbance torque detection Stored pitch compensation

Automatic Operation (Memory) MDI Operation

Search Function (Sequence, Program) Program restart

Dry Run Single Block Buffer Register

Manual Handle Interrupt

Manual Jog Feed (Rapid, Jog, Handle) Manual Handle Feed Rate (x1, x10, x100)

Feed Command (F Code Feedrate Direct Command) Feedrate Override 0-200% (10% Unit)

Jog feed 0-5,000 mm/min (197 ipm)

Rapid traverse override (F0, F25%, F50%, F100%) Override Cancel

Rapid Traverse Bell-Shaped Acceleration/Deceleration Block Skip

Exact Stop Mode / Exact Stop (G61/G09) Dwell (G04)

Helical Interpolation Threading/Synchronous Feed Manual Reference Point Return 1st Reference Point Return

G28 Reference Point Return Check

G27 2nd Reference Point Return

G30 3rd and 4th Reference Point Return