Ultra rigid box way VMC for heavy cutting and long term accuracy Travels: 43.3" x 24.4" x 23.6"

CPV-1100B

• Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.
• Box ways on all 3 axes greatly upgrades stability and dampening capability.
• Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
• Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Standard Features:

Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.

Box ways on all 3 axes greatly upgrades stability and dampening capability.

Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.

Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Capacity

X axis travel: 43.3”

Y axis travel: 24.4”

Z axis travel: 23.6”

Table Loading Area: 47.2” x 23.6”

Allowable Table Load: 2,425 pounds

Spindle

Spindle nose to table top: 4.7” – 28.3”

Column to spindle center: 26.3”

Spindle taper: CAT 40 Big Plus

Spindle speed: 12,000 RPM

A.C. spindle motor (30 min.): 20 HP

Spindle torque (30 min): 132 ft-lbs.

Spindle Driving Method: Belt Drive

Automatic Tool Changer

ATC type: Twin Arm Type

Number of tools: 24

Tool Shank: CAT 40

Max tool dia.: 3.1”

Max tool diameter (No Adjacent Tool): 5.9”

Max tool length: 9.8"

Max tool weight: 15.4 lbs.

Tool Selection: Random Bi-Directional

Motion

X and Y axis rapid traverse rate: 787 IPM

Z axis rapid traverse rate: 787 IPM

Cutting feed rate: 393 IPM

Slide Type: Box Ways

Least command increment: .001mm

Positioning accuracy: +/- .00020" (full stroke)

Repeatability: +/- .00008"

General

Floor space required (W x D X H): 131" x 106" X 113”

Machine weight: 14,330 lbs

Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

Power capacity: 53 Amps Minimum

Air Source Requirement: 85 – 115 PSI